Gas regulator 50 mbar.
Condiciones de envío España y baleares:
- Entrega en 1 o 4 días laborables
- Gastos de envío gratis a partir de 60€
- 6,9€ de gastos de envío para pedidos inferiores a 60€
50 mbar gas regulator for connection to any butane cylinder in Spain.
Use
- It attaches to the 35 mm valve according to figure G56 of the UNE-EN12864 standard.
- For safety reasons, it is recommended to change a rubber seal if it is more than 10 years old.
- We must ensure that no water can enter the regulator.
- Although it is customary to lay the bottle on its side, it is not recommended to move the gas bottle during use.
Connection
- Verify using the drawing that the lever is in the closed position.
- With both hands, we tighten the lower ring of the regulator and place it onto the gas cylinder while continuing to tighten it.
- Now, we press the ring firmly towards the canister until we hear a 'click'.
- Check that it is properly connected. To do this, try lifting the bottle by holding it at the regulator. If the regulator disconnects, repeat the previous step.
- Finally, to open the gas, we must move the upper lever of the regulator in the opposite direction.
disconnection
- Close the regulator's top lever.
- Squeeze the bottom ring of the regular one with both hands and pull sharply upwards.